tutorial: cloth napkins

STEP ONE: Measure and Cut
Measure the width of your fabric, then divide the total in half.
(Example: 44in widthx2=22in)

Measure up from bottom straight edge the total distance from your calculation above and then cut your fabric horizontally.
(Example: Now you will have a piece that is 44x22in)

Cut that piece in half widthwise.
(Example: Now you will have two pieces that are 22x22in.)

Repeat process until you have desired number of pieces.

STEP TWO: Measure Corners
On the wrong side of the fabric, with a ruler measure 5/8in in down and in from each corner. Make a mark where the two lines intersect.

STEP THREE: Fold Corners
Fold each corner to the point you marked in the step above and iron.

STEP FOUR: Fold Edges
Fold the bottom raw edge up 5/8in and iron.

STEP FIVE: Fold Edges
Repeat step four for the top edge.

STEP SIX: Fold Edges
Repeat step four for remaining edges.

STEP SEVEN: Repeat Process
Repeat steps two through six again, this time increasing the measure to 3/4in.

STEP EIGHT: Sew Hem
Sew your hem 1/4in from the outer edge to complete your napkin.